If your paint job didn't go as well as planned, we've got ways you can fix the most common painting mistakes you could make as a DIY Painter.
Did you just finish a paint job by yourself? Nice! And as you stand to appreciate your masterpiece, you discover a few errors in parts or places you've just painted.
Even if your paint job didn't go as well as planned, we've got ways you can fix the most common painting mistakes you could make as a DIY Painter.
To get started on this you will need the following;
Stain blocker or oil-based undercoat
So grab your tools, materials and start fixing!
Drips can be unsightly are usually result from overloading the paint brush during application.
Fix: Use a scraper to scrape back the paint drips (Image 2). Sandpaper the area to a smooth finish (Image 3). Repaint the sanded area.
2. ROUGH FINISH
Rough finishes result from impurities introduced into the paint during application. A rough paint finish spoils the appearance of a painted surface (Image 1).
Fix: Use sandpaper to smoothen the area (Image 2). Clean down with a cloth to remove dust. Repaint the area with topcoat.
3. WRINKLED PAINT
Wrinkles appear on painted surfaces from painting coats too quickly, and not allowing adequate drying time. It can also be caused by extremes of temperature while the paint is drying.
Fix: Strip paint completely using chemical stripper or a hot air gun. Sand down the area and repaint
Stains are caused by smoke damage, mildew, not properly scraping off old paint or not priming before painting.
Fix: Clean the area thoroughly with paint thinner and leave to dry completely. Apply stain blocker or oil-based undercoat over the stain and allow to dry (Image 2). Recoat with spare topcoat.
5. BRUSH MARKS
Sometimes, poor application of paint on a surface leaves streaks from strokes of the brush. Obvious brush marks in different directions can make paint finishes look uneven.
Fix: Sandpaper the area. Wipe the area clean of dust with a damp cloth. Repaint the area.
For a free colour consultation and all your painting needs, visit Kansai Plascon Nigeria at No 8a, Adetokunbo Ademola Street, Victoria Island, Lagos or any of our other outlets. Phone: 01 440 8036.
This is a featured post.